7 Best Headphones for Guitar Amps

Sometimes it becomes necessary to use headphones when playing the guitar. This mostly happens when one wants to practice privately or does not want to disturb other people.

By having the best headphones for guitar amps one can hear the elusive nuances in the tones such as buzzing strings.

Plugging into a guitar amplifier usually takes one to a whole new world. Good headphones allow one to play at low volumes while listening and enjoying rich tones.

Based on a personal experience as a sound engineer, headphones are not built the same and some make the slick clearer than others.

Best Headphones for Guitar Amps Editor’ Choice

Factors to Consider When Selecting Headphones for Guitar Amps

Best headphones for guitar amps

#1.Impedance

 If you are not familiar with this term, this is normally used to show the how the efficiency of a pair of headphones and measured in ohms.

 Headphones with low impedance work well with devices that have low power such as phones.

For a guitar amp, it is highly recommended to go for headphones that have an impedance of at least 35 ohms or a minimum of 32 ohms. The higher the impedance the better it is for guitar amps.

#2. Jack

Most guitar amps are compatible with the 1/8-inch (3.5mm) jack. However, some guitar amps have a ¼” (6.3 mm) output. Thus, for the latter, if you want to use the same headphones with your phone or laptop you can get a 1/8-inch jack adapter.

#3.Noise -cancellation  

It is also recommended to go for noise-canceling headphones to avoid distractions.

#4.Ear Cups Design  

It is a good idea to go for a closed-back design for someone who is practicing to have that full immersion effect.

#.5 Comforts

The headphones should also be comfortable to wear especially for regular users. The earpads or cushions should not scratch and hurt the ears.

The earpads ought to be made from good quality and ergonomic materials such as memory foam. The over-the-ear design is usually more comfortable for most people.

Extra earpads are also important to incase the first pair wears out. Self-adjusting headbands are also ideal for comfort since they adjust based on one’s head position.

#6. Frequency Response

This is the range of frequency that can be produced by the headphones from the audio source.

Special headphones have good frequency responses and thus far much better than the generic ones which are not suitable for the guitar amp. One should target something having a frequency response of at least 15Hz.

Best Headphones for Guitar Amps Reviews

1.Audio-Technica ATH-M50X – Expert’s Choice

best headphones for  guitar amps
  • Type: Closed-back dynamic headphones
  • Impedance: 38 ohms
  • Drivers: 5mm Neodymium Dynamic Drivers
  • Frequency Response:5 Hz to 28 kHz
  • Maximum Input Power: 1600 Mw at 1kHz
  • Driver Diameter:  45mm
  • Sensitivity: 99dB

After many hours of testing and analyzing headphones on various guitar amplifiers, Audio-Technica ATH-M50X emerged as the best choice. This is the headphone for professionals and beginners as well.

They produce very good quality sound and are very comfortable to wear with the over-the-ear design.

The cable is detachable which makes it easy to work with this headphone. This headphone has an impedance of 38 ohms which one might consider being low but is above the recommended impedance of 35 ohms. This impedance does not affect its performance negatively.

The midrange and treble in the Audio-Technica ATH-M50X are very impressive as there is no popping or hissing nor distortion.

Being a closed-back dynamic headphone means that there is no soundstage effect when using these headphones which results in an average bass.

The good thing about closed-back design is that it prevents the occurrence of sound leakage so other people in the room or surrounding will not hear what one is playing. This is very useful for those practicing playing the guitar.

The foldable design of the ATH-M50X makes it very compact and easier to carry around. It is also light which allows one to wear it for long without getting tired.

It is very versatile as it comes with 3 types of cables; 3.94 feet (1.2M) and 9.8 feet (3M) straight cables, and 9.8 feet coiled cable. It also comes with a ¼” inch adapter plus carrying bag which is a plus.

One shortcoming with this headphone is that most of its parts are made from plastic which means that one does not get that premium feel.

 However, the plastic is high grade and does not break easily which is not that bad for some headphones that cost about half the price of the premium brands.

Pros

  • Very good sound quality
  • Comfortable to wear
  • Good frequency response
  • Foldable, light, and compact for portability

Cons

  • Average bass
  • A bit costly

2. Sony MDR7506 Headphones

best headphones  for guitar amps
  • Design: Closed-Back
  • Impedance: 63 ohms
  • Drivers:40mm Neodymium Drivers
  • Frequency Response:10 Hz to 20 kHz
  • Max Power Output:1000 mW
  • Audio Connector:1/8″ / 3.5 mm TRS
  • Sensitivity:104 dB

This emerged as the second-best headphone for guitar amps because they are designed to be practical, comfortable, and attractive.

They are collapsible, which means that you shouldn’t worry much about their portability. Both the earcups and the headband have nice padding that will help you feel comfortable while practicing your guitar

They have outstanding impedance at 63 Ohms which gives them very good performance in high-powered guitar amps.

With their frequency response range of 10Hz to 20kHz, the MDR-7506s provide listeners with a neutral, flat response for the kind of accurate monitoring you’re looking for when plugging into a guitar amp.

These headphones come with a 3m coiled cable that’s not detachable, as well as a 1/4” jack adapter. Also included in the packaging is a soft carry bag for easier transportation.

The shortcoming with this model is that the treble on the Sony MDR7506 can sound hissy at times. This doesn’t apply to all the higher frequencies, but you might experience a hiss once you hear some high tones.

However, the headphones produce great sounds throughout the rest of their frequency response range.

Pros

  • Studio-grade high-impedance headphones
  • 40mm drivers with neodymium magnets for a crisper sound
  • Excellent bass and mid-range frequency response
  • Collapsible ear cups save storage space

Cons

  • Might be too bass-heavy for some
  • High frequencies can sound a bit hissy at times

3. Beyerdynamic DT 770 Pro Headphones

BeyerDynamic DT 770 Pro
  • Design: Closed.
  • Impedance: 250 ohms.
  • Fit Style: Circumaural (Around the Ear)
  • Driver Size: 45mm
  • Frequency Response: 5Hz-35kHz.
  • Noise Attenuation: 18dB.
  • Cable Type: Coiled.

Your electric guitar amp will get along very well with the Beyerdynamic DT 770 Pro studio headphones.

The headphones come with different impedance levels, two of which are pretty low. You can choose between the 32, 80, and 250-ohm impedance.

The features of the Beyerdynamic DT 770 Pro headphones are all about the great quality of sound.

This makes the headphones stand out from many other headphones for guitar amps. Furthermore, the closed-cup design of the headphones allows for great noise isolation, but it doesn’t impact the spacious sound the headphones project.

 The headphones have a very attractive design with comfortable velour ear cups and a nice, padded headband.

 They come in both black and gray and are a pair of very durable headphones. The cable that is on the headphones is single-sided, so you will not get entangled in it while practicing.

The headphones are very adjustable, and they will easily fit the shape of your head.

When it comes to their performance, the Beyerdynamic DT 770 Pro headphones will not fail to deliver.

The sound you’ll hear come out of these headphones will be crisp, detailed, and very transparent. The bass will sound very powerful and not muddy at all, while the mids will be clear and natural.

However, this is one of the best headphones for guitar amp has a tiny flaw that’s related to the treble projection.

Even though they have powerful bass and mids, the treble on these headphones might sound a bit sharp. However, this sharpness is very slight and it will certainly not ‘murder’ your ears.

4. AKG K240 Headphones

AKG K240
  • Design: Semi-open
  • Frequency Response: 15 Hz
  • Sensitivity: 91Db
  • Technology: Dynamic
  • Driver size: 30mm

While the K240 model from AKG is rather inexpensive, its performance is up to par with many less affordable models out there.

These classically designed semi-open headphones have supersized transducers built using the proprietary Varimotion diaphragm. This ensures steady frequency response and allows for a more spatial soundstage effect.

At 55 Ohms, the impedance is somewhere in the middle of the spectrum. But even though it’s not high enough to recommend this model for studio use, it is more than adequate for your guitar amp.

When you put the AKG 240 to test, you’ll find that the high-frequency treble range sounds surprisingly strong. The same applies to the mid-range, but not so much to the low-frequency bass range.

 The bass frequencies can get a bit overloaded, resulting in a sound that’s a tad too explosive. To avoid these audio spikes, you will need to keep the volume down.

In addition to the headphones, the packaging also includes two replaceable and detachable cables. One is a 3m straight cable and the other is a 5m coiled cable. You also get a set of ear cup cushions and a convenient 1/8”-to-1/4” adapter.

Pros

  • Comfortable
  • Good for mixing
  • Good headphones
  • Excellent dynamic range
  • Headphone amplifier included

Cons

  • Not the best build quality

5. Sennheiser HD 599 SE Headphones

Sennheiser HD 599 SE
  • Design: Open Back
  • Impedance: 50 Ohms
  • Frequency Response: 12 Hz to 38.5 kHz
  • Sensitivity: 106dB
  • Cable Length: 9.8 feet and 3.9 feet

Sennheiser is a brand of choice for many audio professionals and a good reason. Their headphones tend to perform well and the 599 SE model is no exception.

With an impedance of 50 Ohms and an open-back design, it can make your guitar sound crisper and more powerful than some other models on the market.

This model utilizes the patented EAR technology that directs signals straight to your ear, thus creating a surprisingly full sound.

The aluminum coils ensure dynamic reproduction with low distortion. There’s still some distortion, but only when listening to bass-heavy tunes at the highest volume.

The frequency response is uniformly good across all three dynamic ranges. Mid-range frequencies stand out the most, but the treble is just as good, and the bass is solid, though it might not be punchy enough for some. And because this is an open-back model, it also has a very good soundstage effect.

It comes with two detachable cables, one with a 3.5mm and another with a 6.3mm jack.

Pros

  • A uniformly good response across all three ranges
  • An open-back model with a solid soundstage effect
  • The EAR technology creates a much richer sound
  • The aluminum coils prevent high distortion

Cons

  • Not very efficient at preventing sound leakage
  • The bass lacks a ‘punch’

6. Yamaha HPH-MT5 Monitor Headphones

Yamaha HPH-MT5 Monitor
  • Design: Closed
  • Fit Style: Circumaural (Around the Ear)
  • Impedance: 51 ohms
  • Driver Size: 40mm
  • Weight: 0.5 lbs
  • Frequency Response: 20Hz-20kHz
  • Cable Type: Straight

As sleek and professional as they come, the Yamaha HPH-MT5headphones can become your new best friend in the studio. These are some of the best pairs of headphones for guitar amps out there.

The HPH-MT54 monitor headphones include a standard stereo plug adaptor that’s 6.3 tiny millimeters. The closed-back design of these headphones will keep external sounds out so you can close your eyes and concentrate only on what you’re hearing. They’re circumaural as well.

They’re more expensive than most sets of headphones we covered, but you can still get them for under $175.

You get to choose the exact fit with these Yamaha headphones, making them almost customized. For instance, you can use a slider to toggle with the length until these sit on your head just right.

A three-dimensional arm pivot also lets you tinker with the fit even further. Your head won’t hurt even if you wear these for hours. That reduces distractions, freeing you up to get more done in the studio.

The HPH-MT54 headphones are coated in synthetic leather, both on the headband and the ear pads. Those pads include cushions with low resistance.

Not only does the pillow-like quality of the cushions enhance the noise isolation, but it boosts your comfort as well.

The HPH-MT5W monitor headphones also include custom drivers at 40 millimeters for more accurate responses and a solid frequency rate. 

Pros

  • Very durable
  • Nice audio quality
  • Good sound isolation
  • Perfect for mixing and recording music

Cons

  • Can sound a little too bright and bass-heavy at times

7. Status Audio CB 1 Headphones

Status Audio CB 1 Headphones
  • Design: Closed-back
  • Impedance:
  • Frequency Response: 15Hz
  • Weight: 13.19 oz
  • Sensitivity: 97 dB
  • Diaphragm: 2 inches
  • Connector Type: mini-phone stereo 3.5 mm

If you are willing to go with what a good number of people might consider being a lesser-known brand, then the Status Audio CB1 presents a lot of value.

 Its top-notch design and sound quality can match higher-end models like the Audio Technica M50X for a fraction of the price. 

It has a low impedance of 32 ohms which is, as stated earlier, the minimum impedance recommended for headphones to be used with guitar amps for performance reasons. However, this does not affect its performance a lot.

It features the same swiveling earcups, detachable cable, and foldable design that are mostly seen on higher-end models like the ATH-M50X.

The sound quality of the CB1 is excellent and is a step above the Audio Technica M30X. It features a tighter bass response and more detail compared to the M30X and other budget offerings. 

Of course, the sound quality isn’t going to be on par with the M50X, but it can get close enough, which should be adequate for guitar practice. Also, like the M50X, it is easy to drive and does not produce hiss. 

Despite its good qualities, there are some downsides that you must consider when purchasing from a less reputable brand.

The build quality has not been proven to be as durable as the Audio Technica’s models. Warranty and replaceability of parts may be an issue when something inside the headphones breaks. 

This is where something like the ATH M30X makes more sense. It may have fewer features and an inferior sound, but at least you have some sort of confidence that it won’t suddenly break while you are using them, especially in a live scenario. 

But if you are okay with those downsides, then the CB1 is downright the better value. It is arguably the best value that you can get on this list.

If you have a tight budget and you want the best sounding and most feature-packed headphones for your guitar amplifier, then the Status Audio CB 1 is one of the best choices that you have. 

Pros

  • Budget headphones
  • Fairly good sound
  • Comfortable

Cons

  • Bulky, with the mixed build quality
  • Muddying warmth

Wrapping up

The Audio-Technica ATH-M50X is the best headphones for guitar amps based on their exemplary good performance.

These headphones are also priced fairly well. The other top choices in this list are also very good headphones and whichever you go for, depending on your personal preferences, will not disappoint you.

 Have a great time playing your guitar in peace.

Did you like our informative reviews and guide above?
Then you will definitely love our other lists of the best product reviews right now on the market!

Sharing is caring!

Leave a Reply